Follow step-by-step instructions to link your XRP2 to your Breedr app - (available on Android devices only)

  1. First turn on your XRP2 and switch to a manual connection to ensure the Bluetooth settings are switched on. The Bluetooth light will display when this is active.

2. Next go to the Bluetooth settings on your Android device and turn on Bluetooth - your Android device should then find the XRP2 and will ask you to pair and connect.

3. Now you can open your Breedr mobile app and tap the Bluetooth icon found at the top right of the screen.

4. You should now see the XRP2 listed on the Connected Devices and next you need to tap the grey box confirm the connection and it should turn green.

If you have a compatible weigh head, you should repeat the same process as above to connect your weigh head.

If using a Tru-test XR5000 you need to first connect your EID reader to the weigh head via bluetooth and then connect the weigh head to your Breedr app.

If using an S3 weigh head, connect via Bluetooth directly to the app only, no need to Bluetooth to the phone too.

Please find a link here to the XRP2 user manual, as this maybe useful to you.

Useful links: Crush Mode explained

Connect weigh equipment for Crush Mode

Crush Mode and compatible systems

All Crush Mode Guides

Need some help? Use the chat window to your right on web or the help button on mobile, call our customer support team on +44 (0) 3300 436327 or email support

Did this answer your question?